Your Subtitle text

Sell/Swap

This just in!!! Posted 02-09-2012

Joe McCauley and Ronnie Woolie are interested in teaming up with 1-2 others in the Houston area to rent a big workspace from Louis Rothermel. If interested then please call Joe @ 713-669-8272.

From a non-member visiting our booth at the Houston Boat Show. Posted 02-09-2012.

Here is the info on the two 12HP Seaking outboards that we spoke about at the boat show on Sunday.

My father purchased the motors new and they were last run in the late 70’s and then stored in a barn in East Texas. Feel free to post them and my contact info. Greg Porter: greg.Porter@exxonmobil.com 281-705-1325

1983 Evinrude 35 hp shortshaft/tiller with 1977 gearcase and exhaust housing, completely rebuilt, broken in properly, and ready to run, $1600.

This motor is for someone who wants a first rate modern 35, like John Slator and I run. I've rebuilt this one as carefully as I rebuilt my 1983 Johnson 35, and it's as fast as that motor. Has very high compression, starts very easily and idles well enough to troll with. I.e., it's a first rate 35.

Here's what was done: Cylinders were honed, pistons, rings, rod bearings, gaskets and seals are all new. Head and block each milled .

005" to insure perfect fit and sealing between the siamesed cylinders of the 1976-2001 35. Rods and crank are in top shape. Relatively new coils and powerpack, all ignition parts were tested. New Champion

L77JC4 spark plugs. New upper and lower shock mounts, new waterpump kit, new propshaft and driveshaft seals, OMC Hi-Vis gear oil. Motor has been broken in foran hour per OMC instructions and was run for a 2nd hour. Finn and I used it to go fishing in Oct., we caught four nice fish. Idles very well, accelerates and runs as well as a new 35.

Paint and decals are new. An al 10x15 al prop comes with the motor, will likely need repitching to 13". I can a offer a very good OMC SST

10x13 cupped prop for $200 more. The tiller handle has been changed since the photo, it's newer and longer. Frankly, I built this powerhead with the intention of selling it to GT-Pro racers in Minnesota, but no bites. I rework their props instead.

*************************************************************************************************************************************************************************

Here is a real deal on a Johnson PO and three barrels of NOS OMC Parts. Posted 02/-09-20102.

Di, my name is Danny Mendiola: I received your information in an email from Tom Oncken. I have been coresponding with him regaring some OMC parts I have. I would appriciate any help you could provide.

My wife and I purchased some property and it came with an old building. There is an outboard motor it is a 22.5 HP model “PO-15” made by Johnson in 1949. If I read it correctly, its serial number appears to be 740304. There were also 3 small barrels (about 2ft tall and 3.5 ft round) of OMC parts still in the boxes. I would appreciate any help you can provide.

My wife made a list of the part numbers from one of the barrels and it is attached. She also took some pictures as will and I have attached a couple of them. Please let me know if you would like more pictures.

If you know someone that may be interested in buying in bulk that would be great. Tom did say you may be able to place them on your members web site to sell. Again just let us know we would appreciate any help you can provide.

My wife Lora is the best one to call I am out on the road most of the time. her number is 361-389-6631. We are in Alice Tx near Corpus Christi by the way. Please feel free to email me or her llmendiola06@yahoo.com or call.

thank you again Danny and Lora Mendiola

Parts List from Danny Mendiola:

PN	Name	Qty
530771 **9
121829
172166
203699
303121
303442
303967	Bowl
305119	Seal	3
305315
305317	Gear
305400
306280
307545
307752	Pinton
309947		2
310000
310344	Housing
310846	Lens
311030	Spring
312190
312869		2
313543	Pump
313815
313880
314504	Spacer	3
315034
315505
316501	Shifter
372847
375514
375711	Shifter
376154	Body	2
376156	Housing
376477
376501	Prop nut
376806
377132	Bearing
377276	Vernatherm
377326
377327	Push button
377458	Shifter
377528
377885
378065
378251	Bearing	3
378264	Bearing
378625
378665
378805	Fuel Pump
379047	SW & Key
379542
379689
379798
380034
380161	Diode
380166	Condenser
380245		3
380610	Prop nut assy	2
381437
381538	381537	prestolite
381538		2
381576
382221
382363	Float
382385		2
382424
382442
382547	Mpller	2
382975
383334		2
383478
383519
383541
383622
383674
384871		3
580258		3
580292
580705

Prestolite
379244	Brush set	17-40 MDO-2012AS
278243	______ Head	B19-39 ___V-1002
377304	Jack Shaft Assy	P36-807 MDO-2035E

************************************************************************************************************************************************************************
Posted on 02-09-2012

The following are non-club members we met at the Houston Boat Show who came up to our club booth with the desire to find homes for their outboard motors/parts:

Mark Miller 713-398-0350 has a 1957 Evinrude Lightwin 3hp.

Dan Kloesel 713-252-6946 has an old electric trolling motor.

Mike Vaughan 318-469-8069 has a Mecury Bronze propellor.

Randy Hall 832-247-7485 has a 1 1/2 or 2 1/2 hp Johnson motor from the 60s or 70s.

A gentleman with the email: rmellettw@att.net has a 40 hp Johnson outboard.

Mark Daigle 979 257-9140 has a "nice" Johnson Sea Horse opposed cylinder (we susprect PO) that his wife wants him to find a home for.

If you are interested, this is all the info we have on these folks and their items, so please contact them individually.